William J. Endres, Ph.D.
Teaching
Research
Machining Dynamics and Mechanics Laboratory
Journal Publications
Conference Publications
Invited Seminars and Panels
Service
Other
 
Journal Publications
student names underlined conference presentations noted
 Copy 1. Radulescu, R., Kapoor, S. G., Endres, W. J., and DeVor, R. E., 1993, “An Investigation of the Vibration of the Face Milling Process During High-Speed Machining,” Trans. of NAMRI/SME, 21, 237-246; also presented at NAMRC 21, 1993.
Copy 2. Endres, W. J., and Waldorf, D. J., 1994, “The Importance of Size Effect Variation Along the Cutting Edge in Predicting the Effective Lead Angle in Turning,” Trans. of NAMRI/SME, 22, 65-72; also presented at NAMRC 22, 1994.
Copy 3. Endres, W. J., DeVor, R. E., and Kapoor, S. G., 1995, “A Dual-Mechanism Approach to the Prediction of Machining Forces:  Part 1 – Model Development,” ASME J. of Engg. for Ind. (now ASME J. Mfg. Sci. and Engg.), 117, 526-533; also presented at the ASME WAM and in Proc., Symp. on Modeling, Monitoring and Control Issues in Mach. Processes, PED-64, 563-576, 1993.  Journal version awarded, with Part 2, the 1997 ASME Blackall Machine Tool and Gage Award .
Copy 4. Endres, W. J., DeVor, R. E., and Kapoor, S. G., 1995, “A Dual-Mechanism Approach to the Prediction of Machining Forces:  Part 2 – Calibration and Validation,” ASME J. of Engg. for Ind. (now ASME J. Mfg. Sci. and Engg.), 117, 534-541; also presented at the ASME WAM and in Proc., Symp. on Modeling, Monitoring and Control Issues in Mach. Processes, PED-64, 577-593, 1993.  Journal version awarded, with Part 1, the 1997 ASME Blackall Machine Tool and Gage Award .
Copy 5. Endres, W. J., 1996, “A Quantitative Energy-Based Method for Predicting Stability Limit as a Direct Function of Spindle Speed for High-Speed Machining,” Trans. of NAMRI/SME, 24, 27-32; also presented at NAMRC 24, May 1996.
Copy 6. Melkote, S. N., and Endres, W. J., 1998, “The Importance of Including Size Effect when Modeling Slot End Milling,” ASME J. Mfg. Sci. and Engg., 120, 68-75; also presented at and in Proc., First S. M. Wu Symp. on Mfg. Sci., 399-406, 1994.
Copy 7. Chiu, W.-C., Thouless, M. D., and Endres, W. J., 1998, “An Analysis of Chipping in Brittle Materials,” J. of Fracture, 90, 287-298.
  8. Manjunathaiah, J., and Endres, W. J., 2000, “A Study of Apparent Negative Rake Angle and its Effects on Shear Angle During Orthogonal Cutting with Edge-Radiused Tools,” Trans. of NAMRI/SME, 28, 197-202; also presented at NAMRC 28, May 2000.
View Jnl Paper 10 9. Schimmel, R. J., Manjunathaiah, J., and Endres, W. J., 2000, “Edge Radius Variability and Force Measurement Considerations,” ASME J. Mfg. Sci. Engg., 122, 590-593; also presented at the ASME IMECE and in Proc., Symp. on Advances in Cutting Tools and Workholding Technology for Machine Tools, MED-6-2, 261-267, 1997.
View Jnl Paper 10 10. Manjunathaiah, J., and Endres, W. J., 2000, “A New Model and Analysis of Orthogonal Machining with an Edge-Radiused Tool,” ASME J. Mfg. Sci. and Engg., 122, 384-390; also presented at the ASME IMECE and in Proc., Symp. on Adv. Matls. Processing, MED-8, 259-268, 1998.
Dekker 11. Schimmel, R. J., Endres, W. J., and Stevenson, R., 2000, “The Effect of Zero Clearance Lands in Orthogonal Machining in Light of an Internally Consistent Material Model,” J. Mach. Sci. and Tech., 4, 101-125.
Dekker 12. Chiu, W.-C., Endres, W. J., and Thouless, M. D., 2000, “An Experimental Study of Orthogonal Machining of Glass,” J. Mach. Sci. and Tech., 4, 253-275.
View Jnl Paper 13 13. Ozdoganlar, O. B., and Endres, W. J., 2000, “An Analytical Representation of Chip Area for Corner-Radiused Tools Under Depth-of-Cut and Feed Variations,” ASME J. Mfg. Sci and Engg., 122, 660-665; also presented at the ASME IMECE and in Proc., Symp. on Adv. Matls. Processing, MED-8, 251-258, 1998.
View Jnl Paper 14 14. Schimmel, R. J., Endres, W. J., and Stevenson, R., 2002, “Application of an Internally Consistent Material Model to Determine the Effect of Tool Edge Geometry in Orthogonal Machining,” ASME J. Mfg. Sci. and Engg., 124, 536-543; also presented at the ASME IMECE and in Proc., Symp. on Mach. Sci. and Tech., MED-10, 327-335, 1999.
PDF 15. Manjunathaiah, J., Beecherl, P. M., Szuba, P. S., and Endres, W. J., 2001, “Model-Based Design of Rotating Insert Tools for Metal Cutting Applications,” Trans. of NAMRI/SME, 29, 351-358; also presented at NAMRC 29, May 2001.
Dekker 16. Chiu, W.-C., Endres, W. J., and Thouless, M. D., 2001, “An Analysis of Surface Cracking during Orthogonal Machining of Glass,” J. Mach. Sci. and Tech., 5, 195-215.
View Jnl Paper 17 17. Endres, W. J., and Ozdoganlar, O. B., 2002, “Existence and Effects of Overlap Factors Greater than Unity and Less than Zero,” J. Manuf. Proc., 4, 67-76; also in Trans. of NAMRI/SME, 29, 159-166 and presented at NAMRC 29, May 2001.
View Jnl Paper 18 18. Endres, W. J., and Kountanya, R. K., 2002, “The Effects of Corner Radius and Edge Radius on Tool Flank Wear,” J. Manuf. Proc., 4, 89-96; also in Trans. of NAMRI/SME, 30, 401-407 and presented at NAMRC 30, May 2002.
19. Li, C.-J., Ulsoy, A. G., and Endres, W. J., 2003, “The Effect of Flexible-Tool Rotation on Regenerative Chatter in Machining,” to appear, ASME J. Mfg. Sci. and Engg., 125 .

Top of Page

Conference Publications
student names underlined not including journal publications that were presented at conferences (as noted above)
OK 1. Endres, W. J., Sutherland, J. W., DeVor, R. E., and Kapoor, S. G., 1990, “A Dynamic Model of the Cutting Force System in the Turning Process,” Proc., Symp. on Monitoring and Cont. for Mfg. Processes, ASME WAM, PED-44, 193-212.
OK 2. Endres, W. J., Sutherland, J. W., and DeVor, R. E., 1990, "Process Improvement Using a Computer-Based Dynamic Force Model for the Turning Process,” Proc., Sixth Int. Conf. on Computer-Aided Production Engg., 29-42.
Yes 3. Endres, W. J., 1995, “Approximations for Efficient Analytical Computation of Effective Lead Angle in Mechanistic Turning, Boring, and Face Milling Models,” Tech. Papers. of NAMRI/SME, 23, 147-152.
Yes 4. Endres, W. J., 1996, “The Effect of Cutting Process Models, Process Gain Selection and Process Nonlinearity on Machining Stability Analysis,” Proc., Symp. on Physics of Mach. Processes – III, ASME IMECE, 115-127.
5. Manjunathaiah, J., and Endres, W. J., 1996, “Effects of a Honed Cutting Edge in Machining,” Proc., Second S. M. Wu Symp. on Mfg. Sci., 25-30.
6. Chiu, W.-C., Endres, W. J., and Thouless, M. D., 1997, “Surface Formation During Rough Machining of Brittle Materials with a Geometrically Defined Tool,” Symp. on Engg. Mechanics in Mfg. Proc. and Matls. Processing, Joint ASME, ASCE, SES Summer Meeting, Evanston, IL.
Yes 7. Endres, W. J., 1997, “An Energy-Based Approach towards Obtaining an Analytical Solution for Chatter Vibration Level,” Tech. Papers of NAMRI/SME, 25, 27-32.
Maybe 8. Ozdoganlar, O. B., and Endres, W. J., 1997, “A Structured Fully-Analytical Approach to Multi-Degree-of-Freedom Time-Invariant Stability Analysis for Machining,” Proc., Symp. on Predictable Modeling in Metal Cutting as Means of Bridging Gap Between Theory and Practice, ASME IMECE, MED-6-2, 153-160.
Maybe 9. Ozdoganlar, O. B., and Endres, W. J., 1998, “An Analytical Stability Solution for the Turning Process with Depth-Direction Dynamics and Corner-Radiused Tooling,” Proc., Symp. on Advances in Modeling, Monitoring, and Control of Machining Systems, ASME IMECE, DSC-64, 511-518.
10. Li, C.-J., Ulsoy, A. G., and Endres, W. J., 1999, “The Effect of Tool Rotation on Regenerative Chatter in Line Boring,” Proc., Symp. on Dynamics, Acoustics, and Simulations, ASME IMECE, DE-98, 235-243.
View Jnl Paper 10 11. Kountanya, R. K., and Endres, W. J., 2001, “A High-Magnification Experimental Study of Orthogonal Cutting with Edge-Radiused Tools,” Proc., Symp. on Fundamental Issues in Machining, ASME IMECE, CD#3, Paper # IMECE2001/MED-23317.
View Jnl Paper 10 12. Endres, W. J., and Loo, M., 2002, “Modeling Cutting Process Nonlinearity for Stability Analysis — Application to Tooling Selection for Valve-Seat Machining,” 5th CIRP Int’l Workshop on Modeling of Machining, May 2002, 71-82.

Top of Page

Invited Seminars and Panels
 1. Seminar on Exploring Future Directions of Machining Process Modeling and its Application, General Motors Technical Center, Warren, MI, May 1995.
  2. Seminar on Practice-Motivated Research in High-Speed Machining Dynamics, PIM-I/UCRC Joint Manufacturing Seminar Series, University of Michigan, College of Engineering, Ann Arbor, MI, Feb. 1996.
  3. Seminar on Finite Element Analysis of Machining with an Edge-Honed Tool, General Motors Tech. Center, Warren, MI, Feb. 1996.
  4. Seminar on Exploring Future Directions of Machining Process Modeling and its Application, Ford Scientific Research Laboratories, Dearborn, MI, Mar. 1996.
  5. Seminar on The Mechanics of Cutting Brittle Materials, Dept. of Mechanical Engineering, University of Kentucky, Lexington, KY, May 2000.
  6. Seminar on The Mechanics of Cutting Brittle Materials, Dept. of Mechanical Engineering – Engineering Mechanics, Michigan Technological University, Houghton, MI, May 2000.
  7. Seminar on The Mechanics of Cutting:  Brittle versus Ductile Materials, Dept. of Mechanical Engineering, University of Wisconsin, Madison, WI, Sep. 2000.
  8. Seminar on The Effects of Edge Hone and other Tool Geometry, National Center for Manufacturing Sciences, Dearborn, MI, Fall Workshop Series, Oct. 2000.
  9. Seminar on Chatter in Machining — High Speeds and Real Tooling, United Technologies Research Center, East Hartford, CT, Oct. 2000.
  10. Seminar on Chatter in Machining — High Speeds and Real Tooling, Dept. of Mechanical Engineering – Engineering Mechanics, Michigan Technological University, Houghton, MI, Dept. Seminar Series, Sep. 2001.
  11. Panel on Impact of Analysis and Understanding of Machining at a Fundamental Level – with S. Chandrasekar (Purdue U.), I. S. Jawahir (U. Kentucky), T. Marusich (Third Wave Systems, Inc.), and D. Stephenson (General Motors), organized by R. Stevenson (General Motors) and V. Madhavan (Wichita State U.), ASME IMECE, 2001.
  12. Panel on Dynamic Performance of Machine-Tool Systems – with Y. Altintas (U. British Columbia), J. E. Halley (Boeing), K. S. Smith (UNC-Charlotte), organized by J. T. Roth (Penn. State U. – Erie) and B. Jokiel (Sandia NL), ASME IMECE, 2002.

Top of Page