Listed here are journal and conference publications of work conducted in the MDML.
To view a complete list of Prof. Endres' publications, please refer to his personal Research page.

Journal Publications
student names underlined conference presentations noted
Copy 1. Chiu, W.-C., Thouless, M. D., and Endres, W. J., 1998, “An Analysis of Chipping in Brittle Materials,” J. of Fracture, 90, 287-298.
  2. Manjunathaiah, J., and Endres, W. J., 2000, “A Study of Apparent Negative Rake Angle and its Effects on Shear Angle During Orthogonal Cutting with Edge-Radiused Tools,” Trans. of NAMRI/SME, 28, 197-202; also presented at NAMRC 28, May 2000.
View Jnl Paper 10 3. Schimmel, R. J., Manjunathaiah, J., and Endres, W. J., 2000, “Edge Radius Variability and Force Measurement Considerations,” ASME J. Mfg. Sci. Engg., 122, 590-593; also presented at the ASME IMECE and in Proc., Symp. on Advances in Cutting Tools and Workholding Technology for Machine Tools, MED-6-2, 261-267, 1997.
View Jnl Paper 10 4. Manjunathaiah, J., and Endres, W. J., 2000, “A New Model and Analysis of Orthogonal Machining with an Edge-Radiused Tool,” ASME J. Mfg. Sci. and Engg., 122, 384-390; also presented at the ASME IMECE and in Proc., Symp. on Adv. Matls. Processing, MED-8, 259-268, 1998.
Dekker 5. Schimmel, R. J., Endres, W. J., and Stevenson, R., 2000, “The Effect of Zero Clearance Lands in Orthogonal Machining in Light of an Internally Consistent Material Model,” J. Mach. Sci. and Tech., 4, 101-125.
Dekker 6. Chiu, W.-C., Endres, W. J., and Thouless, M. D., 2000, “An Experimental Study of Orthogonal Machining of Glass,” J. Mach. Sci. and Tech., 4, 253-275.
View Jnl Paper 13 7. Ozdoganlar, O. B., and Endres, W. J., 2000, “An Analytical Representation of Chip Area for Corner-Radiused Tools Under Depth-of-Cut and Feed Variations,” ASME J. Mfg. Sci and Engg., 122, 660-665; also presented at the ASME IMECE and in Proc., Symp. on Adv. Matls. Processing, MED-8, 251-258, 1998.
View Jnl Paper 14 8. Schimmel, R. J., Endres, W. J., and Stevenson, R., 2002, “Application of an Internally Consistent Material Model to Determine the Effect of Tool Edge Geometry in Orthogonal Machining,” ASME J. Mfg. Sci. and Engg., 124, 536-543; also presented at the ASME IMECE and in Proc., Symp. on Mach. Sci. and Tech., MED-10, 327-335, 1999.
Dekker 9. Chiu, W.-C., Endres, W. J., and Thouless, M. D., 2001, “An Analysis of Surface Cracking during Orthogonal Machining of Glass,” J. Mach. Sci. and Tech., 5, 195-215.
View Jnl Paper 17 10. Endres, W. J., and Ozdoganlar, O. B., 2002, “Existence and Effects of Overlap Factors Greater than Unity and Less than Zero,” J. Manuf. Proc., 4, 67-76; also in Trans. of NAMRI/SME, 29, 159-166 and presented at NAMRC 29, May 2001.
View Jnl Paper 18 11. Endres, W. J., and Kountanya, R. K., 2002, “The Effects of Corner Radius and Edge Radius on Tool Flank Wear,” J. Manuf. Proc., 4, 89-96; also in Trans. of NAMRI/SME, 30, 401-407 and presented at NAMRC 30, May 2002.
12. Li, C.-J., Ulsoy, A. G., and Endres, W. J., 2003, “The Effect of Flexible-Tool Rotation on Regenerative Chatter in Machining,” to appear, ASME J. Mfg. Sci. and Engg., 125 .

Conference Publications
student names underlined not including journal publications that were presented at conferences (as noted above)
Yes 1. Endres, W. J., 1995, “Approximations for Efficient Analytical Computation of Effective Lead Angle in Mechanistic Turning, Boring, and Face Milling Models,” Tech. Papers. of NAMRI/SME, 23, 147-152.
Yes 2. Endres, W. J., 1996, “The Effect of Cutting Process Models, Process Gain Selection and Process Nonlinearity on Machining Stability Analysis,” Proc., Symp. on Physics of Mach. Processes – III, ASME IMECE, 115-127.
3. Manjunathaiah, J., and Endres, W. J., 1996, “Effects of a Honed Cutting Edge in Machining,” Proc., Second S. M. Wu Symp. on Mfg. Sci., 25-30.
4. Chiu, W.-C., Endres, W. J., and Thouless, M. D., 1997, “Surface Formation During Rough Machining of Brittle Materials with a Geometrically Defined Tool,” Symp. on Engg. Mechanics in Mfg. Proc. and Matls. Processing, Joint ASME, ASCE, SES Summer Meeting, Evanston, IL.
Yes 5. Endres, W. J., 1997, “An Energy-Based Approach towards Obtaining an Analytical Solution for Chatter Vibration Level,” Tech. Papers of NAMRI/SME, 25, 27-32.
Maybe 6. Ozdoganlar, O. B., and Endres, W. J., 1997, “A Structured Fully-Analytical Approach to Multi-Degree-of-Freedom Time-Invariant Stability Analysis for Machining,” Proc., Symp. on Predictable Modeling in Metal Cutting as Means of Bridging Gap Between Theory and Practice, ASME IMECE, MED-6-2, 153-160.
Maybe 7. Ozdoganlar, O. B., and Endres, W. J., 1998, “An Analytical Stability Solution for the Turning Process with Depth-Direction Dynamics and Corner-Radiused Tooling,” Proc., Symp. on Advances in Modeling, Monitoring, and Control of Machining Systems, ASME IMECE, DSC-64, 511-518.
8. Li, C.-J., Ulsoy, A. G., and Endres, W. J., 1999, “The Effect of Tool Rotation on Regenerative Chatter in Line Boring,” Proc., Symp. on Dynamics, Acoustics, and Simulations, ASME IMECE, DE-98, 235-243.
View Jnl Paper 10 9. Kountanya, R. K., and Endres, W. J., 2001, “A High-Magnification Experimental Study of Orthogonal Cutting with Edge-Radiused Tools,” Proc., Symp. on Fundamental Issues in Machining, ASME IMECE, CD#3, Paper # IMECE2001/MED-23317.